This powerful 10600 Watt Solar power generator is perfect for home backup, off grid and job site applications. I provides 10600 watts of continuous power. 

The Larson Electronics SPG1060-800AH-24V-TLR10 portable solar powered generator trailer offers reliable and safe power in remote locations. This portable solar powered generator features four 265-watt solar panels with a versatile slider function for seamless deployment, as well as an 800aH capacity battery bank. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*

This portable solar powered generator trailer comes with eight 200aH 12V DC sealed-lead acid batteries in series. The battery bank features 800aH capacity at 24V DC and is capable of running a 150-watt load for three consecutive days without sunlight. This unit can be deployed quickly to support heavy duty equipment and electronics, such as laptops, communication devices, security cameras, portable lights and more. Solar Charge Controller: In this 24 volt system solar control system, each panel is terminated with a fused combiner box with a single lever action cut-off switch. With the switch set to the ‘on’ position, the combiner box passes power to the 60-amp capacity TriStar MPPT charge controller. Oddly enough, most charge controllers are not rated past 104 degrees Fahrenheit despite the fact the will always be close to direct sunlight. In the summer time in Texas, our fabrication shop is normally warmer than that, so this solar light tower uses a charge controller that would support the southern heat. We improve on that capability by shading the charge controller and adding additional air flow from the exhaust of a 1400 CFM component cooling system with internal adjustable thermostat. Solar Panel Assembly: This unit is comprised of four 265-watt solar panels, which provides a combined 42 amps per hour during charging. The panels are mounted securely and can be deployed using a slider function for easy and safe handling. When stored, the panels lay flat on the trailer. During deployment, the four solar panels are mounted to a frame angled at 45° to capture the intensity of the sun for optimized light intake. The panels are wired to the solar charger control box, which manages the charging system. Component Control Center: In order to ensure that the 50% threshold on the batteries is controlled, this solar trailer includes a system of min/max voltage sensors that monitor the voltage produced by the batteries and will automatically shut off power distribution when the battery capacity falls below 50%. This protects the batteries from failure. We also include ground fault protection. All the electrical components are encapsulated in a NEMA 3R job box that is bolted to the trailer. Since most of these components are not rated for high heat, our component cooling system circulates air within the job box at 1400 CFM when the ambient temperature exceeds 90 degrees Fahrenheit. The job box that contains the component control system includes locks for security purposes. Trailer Assembly: The entire assembly is mounted to a 10' by 7', single axle trailer via six 1/2" anchor bolts. The two wheel trailer is equipped with 3,500 lbs axle and leaf springs with 15" trailer tires. A standard 2" ball coupling, two standard safety chains, and 7-pin flat trailer plug allow for easy hookup and towing. The trailer tongue can be removed for long term deployment. A rugged and waterproof job box is included, safely secured to the trailer. Four outriggers mounted to the corners of the trailer allow operators to level the trailer, and provide stabilization during deployment. All trailer lighting complies with DOT/FMVSS regulations. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973.

Specifications / Additional Information SPG1060-800AH-24V-TLR10 Portable Solar Powered Generator Trailer Quick Summary: Panels: (4) 265 Watt Panels Fully Solar, No Fuel Needed Method of Deployment: Manual Slider Function Steel Construction Battery Bank: (8) 200aH 12V DC Sealed Lead Acid Batteries in Series Powder Coated Finish Battery Capacity: 800aH at 24V DC (4) 265 Watt Solar Panels with Slider Option Output Voltage: 24V DC (4) 1,000 lb Outriggers Trailer Specs: 3 Day Operation w/ 150W Load Materials: Steel Trailer Dimensions: 10' L x 7' W Trailer Bed Hitch: 2" Ball Coupler