Anker SOLIX E10 AC Generator Adapter | 9,600W 240V | A17E1141-88

Anker SOLIX E10 AC Generator Adapter

The Anker SOLIX E10 AC Generator Adapter lets a compatible 240V AC generator charge an Anker SOLIX E10 while the E10 continues supporting connected home loads. It is the right factory accessory when you want to combine the long runtime of a fuel generator with the quieter, cleaner operation of the E10 battery system.

It supports up to 9,600W at 240V and 40A maximum. The attached 50 cm cable connects directly to the E10, while the generator side accepts the properly matched generator output cord.

Important compatibility note: Anker currently lists this adapter for E10 standalone and Smart Inlet Box setups. It is not currently compatible with the Anker SOLIX Power Dock. Customers using a Power Dock should follow the Power Dock manual for the correct generator connection method.

Manufacturer SKU: A17E1141-88
Color: Silver/gray with black connectors
Product type: Non-battery Anker SOLIX E10 accessory

Key Features

• Connect a compatible AC generator: Allows qualified non-Anker generators to supply power to the E10 system.
• Simultaneous charging and load support: Generator power can recharge the E10 while the E10 continues powering connected home loads.
• High-power bypass capability: Supports up to 9,600W at 240V and 40A maximum.
• Factory E10 connection: Purpose-built connector fits the Anker SOLIX E10 Power Module without improvised adapters.
• 50 cm attached cable: Compact length keeps the generator connection organized near the E10 system.
• Two-year manufacturer warranty: Covered under Anker's published E10 accessory warranty policy.

What's Included

• 1 × Anker SOLIX E10 AC Generator Adapter

Anker SOLIX E10, generator, Smart Inlet Box, Power Dock, generator output cord, fuel, extension cables, transfer equipment, and installation labor are not included.

Best Use Cases

• Extending Anker SOLIX E10 runtime during multi-day outages
• Recharging the E10 when solar production is limited
• Combining an existing compatible 240V generator with an E10 standalone system
• Generator-supported E10 installations using the Anker SOLIX Smart Inlet Box
• Reducing the number of hours a fuel generator must directly carry household loads
• Storm preparation, remote properties, and long-duration emergency backup

Full Specifications

Generator Compatibility and Safety

Do not assume that every generator will work. The generator must provide a compatible 240V AC output, adequate capacity, and the correct output connection. A separate generator output cord is required and must match both the generator receptacle and this adapter. Confirm the generator model and outlet before ordering.

Operate every fuel-powered generator outdoors only, far from doors, windows, vents, and occupied spaces. Never run a generator inside a garage, home, shed, or enclosed area. Follow the generator manual, E10 manual, Anker instructions, local electrical code, and all carbon-monoxide safety requirements.

Frequently Asked Questions

What does the Anker SOLIX E10 AC Generator Adapter do?

It allows a compatible 240V AC generator to send power into an Anker SOLIX E10 so the system can recharge while continuing to support connected loads.

How much power can it handle?

Anker rates the adapter for up to 9,600W at 240V with a 40A maximum current.

Can I use a non-Anker generator?

Yes, provided the generator has a compatible 240V AC output and the correct separate output cord. Confirm the generator's voltage, receptacle, output, and operating requirements before connecting it.

Does this work with the Anker SOLIX Power Dock?

No. Anker currently states that this adapter is not compatible with the Power Dock. For generator integration with a Power Dock installation, follow the current Power Dock manual and Anker guidance.

Does it work with the Smart Inlet Box?

Yes. Anker lists it as compatible with E10 standalone and Smart Inlet Box configurations.

Does it include the generator connection cord?

No. This listing includes the Anker E10 AC Generator Adapter only. The generator-side output cord must be purchased separately and matched to the generator's outlet.

How long is the attached cable?

Anker specifies a 500 mm cable length, which is 50 cm or approximately 19.7 inches. The supplier data also lists an overall product length measurement of 570 mm.

What warranty does it have?

Anker lists a two-year limited warranty for model A17E1141-88. Current warranty terms and proof-of-purchase requirements apply.

Why Buy from AllProGenerators?

AllProGenerators provides free contiguous-U.S. shipping and real USA-based support. If you are not sure whether your generator has the correct 240V output or outlet, call us at 954-249-2314 with the generator model before ordering. We would rather check it first than have you end up with the wrong connection.