The Anker SOLIX PS200 Bifacial Portable Solar Panel gives you 200W of rated solar charging in a folding panel that is easy to bring along. It uses N-type solar cells with 25%+ conversion efficiency and collects light through both the front and rear surfaces. This is the bifacial AS320111 model.
At 10.6 lb on Anker's specification sheet, the PS200 is a practical option for camping, RV stops, and keeping a compatible power station charged during an outage. Unfold the panel, set up its stand, and face it toward clear sunlight. The included extension leads and XT-60i cable help connect it to supported equipment without having to piece together a basic cable set.
Key Features
- 200W rated solar power: Portable charging for a compatible power station, with actual output dependent on sunlight and equipment limits.
- Bifacial generation: The rear surface captures reflected light. Anker advertises up to 10% more power in favorable conditions over reflective surfaces such as sand, snow, or light-colored concrete.
- N-type cells: Anker specifies 25%+ conversion efficiency for the next-generation cell design.
- Lightweight folding design: Folds to 27.0 × 31.2 × 1.8 inches and weighs approximately 11 lb including the stand.
- Reinforced construction: Aluminum framing and impact-resistant materials help protect the panel during transport and outdoor setup.
- IP68 protection: Water and dust resistance for outdoor use. Anker still advises avoiding heavy rain and submersion.
- Cables included: Two 8.2-foot solar extension cables and a 1.6-foot PV-to-XT-60i charging cable.
- Five-year limited warranty: Manufacturer coverage subject to Anker's terms. The advertised 10-year design life is separate from warranty coverage.
How the Bifacial Design Helps
The front of the PS200 collects direct sunlight while its rear face can collect light reflected from the surrounding surface. Leave the back exposed to reflected light instead of placing it flat against an opaque surface. A bright, open area can make better use of the rear cells than a shaded spot over dark ground.
The extra rear-side output is conditional. Cloud cover, shadows, panel angle, temperature, surface reflectivity, and the connected power station's input limit all affect charging. Treat 200W as the rated panel output rather than a constant charging rate throughout the day.
Best Use Cases
- Camping and weekend trips: Recharge a compatible power station used for lights, phones, cameras, and other small equipment.
- RV campsite charging: Place the portable panel in the sun while keeping your power station in a suitable protected location.
- Emergency preparation: Add a solar charging option to an existing compatible battery power station.
- Portable off-grid setups: Unfold it when needed and pack it away between uses.
Full Specifications
| Brand / product | Anker SOLIX PS200 Bifacial Portable Solar Panel |
|---|---|
| Manufacturer SKU | AS320111 |
| Product family model | AS320 |
| UPC | 194644333515 |
| Rated maximum power | 200W |
| Cell technology | Bifacial N-type |
| Conversion efficiency | 25%+ (Anker marketing specification) |
| Potential rear-side gain | Up to 10% additional power in favorable reflective conditions |
| Maximum-power voltage (Vmp) | 48V DC |
| Maximum-power current (Imp) | 4.16A |
| Open-circuit voltage (Voc) | 57.6V |
| Short-circuit current (Isc) | 4.38A |
| Power tolerance | ±5% |
| Maximum system voltage | 75V DC |
| Panel connectors | MC4 |
| Included power-station adapter | PV connector to XT-60i, 1.6 ft (0.5 m) |
| Included extension leads | Two 8.2 ft (2.5 m) solar cables |
| Environmental protection | IP68 water and dust resistance |
| Operating temperature | -4°F to 140°F (-20°C to 60°C) |
| Unfolded dimensions | 54.2 × 31.2 × 0.7 in (1,377 × 792 × 17 mm) |
| Folded dimensions | 27.0 × 31.2 × 1.8 in (685 × 792 × 45 mm) |
| Weight | 10.6 lb; Anker also describes it as approximately 11 lb with the stand |
| Frame | Reinforced aluminum |
| Stand position | Approximately 35°, with slight bracket adjustment |
| Package dimensions (datasheet) | 850 × 100 × 770 mm |
| Gross package weight (datasheet) | 7.85 kg |
| Manufacturer stated design life | 10 years; not a 10-year warranty |
| Manufacturer limited warranty | 5 years |
Electrical test ratings, system voltage, temperature limits, and package measurements are from Anker's bifacial panel datasheet. Dimensions and the 10.6 lb weight follow the current U.S. product page.
What's Included
- One Anker SOLIX PS200 Bifacial Portable Solar Panel
- Two 8.2 ft (2.5 m) solar charging cables
- One 1.6 ft (0.5 m) PV connector to XT-60i charging cable
- Quick-start guide
- Safety card
A power station or battery is sold separately.
Power Station Compatibility
Check the receiving equipment's solar input before connecting. The PS200 has a 48V operating voltage and 57.6V open-circuit voltage; the 48V figure alone is not enough to establish compatibility. Verify allowable open-circuit voltage, current, wattage, connector type, and any temperature-related requirements in the power station manual.
The included XT-60i cable does not make the panel compatible with every XT60-equipped device. For multiple panels, check the complete array's voltage and current and the panel's 75V maximum system rating before choosing series or parallel wiring. Call us if you need help matching the panel to your equipment.
Frequently Asked Questions
Is this the bifacial PS200?
Yes. This listing is for the Anker SOLIX PS200 Bifacial Portable Solar Panel, SKU AS320111 and UPC 194644333515. It uses both front and rear surfaces to collect available light.
Will it always deliver 200W?
No. Solar output changes with sunlight, shade, temperature, orientation, cables, and the connected equipment. Position the panel in unobstructed sunlight and adjust it as conditions change.
Does bifacial mean twice the power?
No. Anker advertises up to 10% additional power from the dual-sided design under favorable conditions. It does not mean 200W from each side.
Is the PS200 waterproof?
It carries an IP68 rating, but Anker advises avoiding heavy rain and submersion. Keep connections protected and follow the supplied safety instructions.
Does it have an adjustable stand?
Anker describes an approximately 35° stand position with slight adjustment available. Set it up so sunlight strikes the panel as directly as practical.
Can it charge a non-Anker power station?
Only if the receiving equipment supports the panel's electrical specifications and connector arrangement. Check the 57.6V open-circuit voltage as well as the input current, power limits, and required adapter.
Can it store power or run household appliances by itself?
This is a solar panel, not a battery or AC inverter. It supplies solar energy to compatible charging equipment; a suitable power station is needed to store energy and power AC appliances.
What warranty does it include?
Anker provides a five-year limited warranty for the original purchaser, subject to its coverage and exclusions. The stated 10-year design life is not an additional warranty period.
Setup and Care
Unfold the panel and stand on a stable surface, keep both faces clear of shade where practical, and connect the appropriate cables after confirming compatibility. The metal frame can become hot in sunlight; use care or protective gloves when moving it. Follow the supplied safety card for cleaning and handling. Stop using the panel if its surface is damaged.
Help Choosing Your Solar Panel
AllProGenerators.com is a family-owned authorized Anker dealer, serving customers since 2018. Call 954-249-2314 for help checking compatibility. Browse our solar panels and Anker SOLIX products. For a larger panel, see the Anker SOLIX PS400 Bifacial 400W panel.
| Shipping | This item ships to |
![]() |
Fast Shipping in the USA. Items ship the same or next day We process orders 7 days a week to ensure the fastest shipping possible. All generators are shipped as fast as possible out of several US locations to ensure the fastest delivery. |
|
![]() |
We Put Our Customers First We have done the research for you to find the best manufacturers with the best warranties. Every unit on our site is covered by a high quality manufacturers warranty. |
|
![]() |
We offer the absolute lowest price we can offer |
|
![]() |
We insist that you love our service. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. |
|
![]() |
Ordering from AllProGenerators.com is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. |
Description
The Anker SOLIX PS200 Bifacial Portable Solar Panel gives you 200W of rated solar charging in a folding panel that is easy to bring along. It uses N-type solar cells with 25%+ conversion efficiency and collects light through both the front and rear surfaces. This is the bifacial AS320111 model.
At 10.6 lb on Anker's specification sheet, the PS200 is a practical option for camping, RV stops, and keeping a compatible power station charged during an outage. Unfold the panel, set up its stand, and face it toward clear sunlight. The included extension leads and XT-60i cable help connect it to supported equipment without having to piece together a basic cable set.
Key Features
- 200W rated solar power: Portable charging for a compatible power station, with actual output dependent on sunlight and equipment limits.
- Bifacial generation: The rear surface captures reflected light. Anker advertises up to 10% more power in favorable conditions over reflective surfaces such as sand, snow, or light-colored concrete.
- N-type cells: Anker specifies 25%+ conversion efficiency for the next-generation cell design.
- Lightweight folding design: Folds to 27.0 × 31.2 × 1.8 inches and weighs approximately 11 lb including the stand.
- Reinforced construction: Aluminum framing and impact-resistant materials help protect the panel during transport and outdoor setup.
- IP68 protection: Water and dust resistance for outdoor use. Anker still advises avoiding heavy rain and submersion.
- Cables included: Two 8.2-foot solar extension cables and a 1.6-foot PV-to-XT-60i charging cable.
- Five-year limited warranty: Manufacturer coverage subject to Anker's terms. The advertised 10-year design life is separate from warranty coverage.
How the Bifacial Design Helps
The front of the PS200 collects direct sunlight while its rear face can collect light reflected from the surrounding surface. Leave the back exposed to reflected light instead of placing it flat against an opaque surface. A bright, open area can make better use of the rear cells than a shaded spot over dark ground.
The extra rear-side output is conditional. Cloud cover, shadows, panel angle, temperature, surface reflectivity, and the connected power station's input limit all affect charging. Treat 200W as the rated panel output rather than a constant charging rate throughout the day.
Best Use Cases
- Camping and weekend trips: Recharge a compatible power station used for lights, phones, cameras, and other small equipment.
- RV campsite charging: Place the portable panel in the sun while keeping your power station in a suitable protected location.
- Emergency preparation: Add a solar charging option to an existing compatible battery power station.
- Portable off-grid setups: Unfold it when needed and pack it away between uses.
Full Specifications
| Brand / product | Anker SOLIX PS200 Bifacial Portable Solar Panel |
|---|---|
| Manufacturer SKU | AS320111 |
| Product family model | AS320 |
| UPC | 194644333515 |
| Rated maximum power | 200W |
| Cell technology | Bifacial N-type |
| Conversion efficiency | 25%+ (Anker marketing specification) |
| Potential rear-side gain | Up to 10% additional power in favorable reflective conditions |
| Maximum-power voltage (Vmp) | 48V DC |
| Maximum-power current (Imp) | 4.16A |
| Open-circuit voltage (Voc) | 57.6V |
| Short-circuit current (Isc) | 4.38A |
| Power tolerance | ±5% |
| Maximum system voltage | 75V DC |
| Panel connectors | MC4 |
| Included power-station adapter | PV connector to XT-60i, 1.6 ft (0.5 m) |
| Included extension leads | Two 8.2 ft (2.5 m) solar cables |
| Environmental protection | IP68 water and dust resistance |
| Operating temperature | -4°F to 140°F (-20°C to 60°C) |
| Unfolded dimensions | 54.2 × 31.2 × 0.7 in (1,377 × 792 × 17 mm) |
| Folded dimensions | 27.0 × 31.2 × 1.8 in (685 × 792 × 45 mm) |
| Weight | 10.6 lb; Anker also describes it as approximately 11 lb with the stand |
| Frame | Reinforced aluminum |
| Stand position | Approximately 35°, with slight bracket adjustment |
| Package dimensions (datasheet) | 850 × 100 × 770 mm |
| Gross package weight (datasheet) | 7.85 kg |
| Manufacturer stated design life | 10 years; not a 10-year warranty |
| Manufacturer limited warranty | 5 years |
Electrical test ratings, system voltage, temperature limits, and package measurements are from Anker's bifacial panel datasheet. Dimensions and the 10.6 lb weight follow the current U.S. product page.
What's Included
- One Anker SOLIX PS200 Bifacial Portable Solar Panel
- Two 8.2 ft (2.5 m) solar charging cables
- One 1.6 ft (0.5 m) PV connector to XT-60i charging cable
- Quick-start guide
- Safety card
A power station or battery is sold separately.
Power Station Compatibility
Check the receiving equipment's solar input before connecting. The PS200 has a 48V operating voltage and 57.6V open-circuit voltage; the 48V figure alone is not enough to establish compatibility. Verify allowable open-circuit voltage, current, wattage, connector type, and any temperature-related requirements in the power station manual.
The included XT-60i cable does not make the panel compatible with every XT60-equipped device. For multiple panels, check the complete array's voltage and current and the panel's 75V maximum system rating before choosing series or parallel wiring. Call us if you need help matching the panel to your equipment.
Frequently Asked Questions
Is this the bifacial PS200?
Yes. This listing is for the Anker SOLIX PS200 Bifacial Portable Solar Panel, SKU AS320111 and UPC 194644333515. It uses both front and rear surfaces to collect available light.
Will it always deliver 200W?
No. Solar output changes with sunlight, shade, temperature, orientation, cables, and the connected equipment. Position the panel in unobstructed sunlight and adjust it as conditions change.
Does bifacial mean twice the power?
No. Anker advertises up to 10% additional power from the dual-sided design under favorable conditions. It does not mean 200W from each side.
Is the PS200 waterproof?
It carries an IP68 rating, but Anker advises avoiding heavy rain and submersion. Keep connections protected and follow the supplied safety instructions.
Does it have an adjustable stand?
Anker describes an approximately 35° stand position with slight adjustment available. Set it up so sunlight strikes the panel as directly as practical.
Can it charge a non-Anker power station?
Only if the receiving equipment supports the panel's electrical specifications and connector arrangement. Check the 57.6V open-circuit voltage as well as the input current, power limits, and required adapter.
Can it store power or run household appliances by itself?
This is a solar panel, not a battery or AC inverter. It supplies solar energy to compatible charging equipment; a suitable power station is needed to store energy and power AC appliances.
What warranty does it include?
Anker provides a five-year limited warranty for the original purchaser, subject to its coverage and exclusions. The stated 10-year design life is not an additional warranty period.
Setup and Care
Unfold the panel and stand on a stable surface, keep both faces clear of shade where practical, and connect the appropriate cables after confirming compatibility. The metal frame can become hot in sunlight; use care or protective gloves when moving it. Follow the supplied safety card for cleaning and handling. Stop using the panel if its surface is damaged.
Help Choosing Your Solar Panel
AllProGenerators.com is a family-owned authorized Anker dealer, serving customers since 2018. Call 954-249-2314 for help checking compatibility. Browse our solar panels and Anker SOLIX products. For a larger panel, see the Anker SOLIX PS400 Bifacial 400W panel.
Shipping
| Shipping | This item ships to |
Delivery
![]() |
Fast Shipping in the USA. Items ship the same or next day We process orders 7 days a week to ensure the fastest shipping possible. All generators are shipped as fast as possible out of several US locations to ensure the fastest delivery. |
|
Why Buy From Us
![]() |
We Put Our Customers First We have done the research for you to find the best manufacturers with the best warranties. Every unit on our site is covered by a high quality manufacturers warranty. |
|
![]() |
We offer the absolute lowest price we can offer |
|
![]() |
We insist that you love our service. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. |
|
![]() |
Ordering from AllProGenerators.com is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. |
Review
Wildcat 10kW Renegade 3ph Tier 4F Diesel Generator
Choose Voltage and Enclosure or No Enclosure (Skid Mount)
PAGURO 4000W Marine Diesel Generator
options/Select one of the following pre-wired AC options:
Off Grid Wired Controller Pure Sine Wave Inverter Power 6000W Solar Inverter 12V/48V/96V/110V DC to AC 120V/230V/240V Converter
Ships From/Input Voltage/Output Voltage, Socket Type




