Get started with a 500W rigid solar array and the Anker SOLIX S5000 for a cabin, garage or home backup setup. This AllProGenerators bundle pairs the 5,024Wh station with two black RICH SOLAR MEGA 250 PRO ONYX 250W panels. The pair connects to the S5000’s high-voltage solar input, and the free 50-foot red-and-black extension set lets you place the panels in open sun while keeping the station in a dry, ventilated location.
What comes with the 500W kit
- One Anker SOLIX S5000 with its standard factory accessories, including the High-PV solar adapter.
- Two RICH SOLAR MEGA 250 PRO ONYX 250W black rigid solar panels (RS-M250PB).
- One free RICH SOLAR 50-ft 10 AWG solar extension set (RS-50102) with one red lead and one black lead.

Best use cases
- Cabins and weekend properties. Put the rigid pair on a sunny rack and use the station for a compact refrigerator, lights and chargers. Start with the energy you use over a full day when estimating how much the array will replace.
- Garage and workshop power. Keep the station near a workbench and put the panels where buildings and trees will cast less shade. The station can run compatible tools and task lighting. Start motor-driven tools one at a time to manage surge demand.
- Outage essentials. Plug in a refrigerator, internet equipment and lighting as needed. Daytime solar can restore part of the energy those loads use. A qualified electrician should install compatible transfer equipment for hardwired circuits.
- A starter array with room to grow. Both included panels use High-PV, leaving Low-PV available for a separately sized array. Optional Anker BP5000 batteries can increase storage later.
How the two panels connect to the S5000
The two ONYX panels form one series string feeding the High-PV input through the factory Anker solar adapter. In series, the panel voltages add and the current stays the same. The pair is rated at 73.8V operating voltage and 89.4V open-circuit voltage under standard test conditions. The 50-foot red and black leads run together between the array and the adapter.
Use the High-PV port for this series pair. The S5000 Low-PV input is limited to 60V, below the pair’s open-circuit voltage. Have a qualified installer confirm cold-corrected voltage, polarity, connector compatibility, racking and any site-required electrical protection before connecting the array.

Full specifications
| Specification | Details |
|---|---|
| Model | Anker SOLIX S5000, AS5101A1 |
| Battery | 5,024Wh LiFePO₄. Supports up to five optional Anker SOLIX BP5000 batteries, for about 30kWh total. |
| AC output | 4,500W continuous, 8,000W brief peak. 120V and 120/240V split-phase. |
| AC receptacles | 120V NEMA 5-20R and TT-30R, plus 120/240V L14-30R. Individual outlet limits apply. |
| High-PV solar input | 16–165V DC, 17A max, up to 2,000W with a compatible array. This bundle uses this input. |
| Low-PV solar input | 11–60V DC, 17A max, up to 1,000W with a compatible array. |
| AC charging | Anker lists up to 1,800W input at 120V or 4,500W at 240V with compatible charging equipment and supply. |
| USB charging | USB-A up to 12W and USB-C up to 100W on the highest-power port. |
| Backup switchover | 10 ms or less under Anker’s specified conditions. |
| Station size and weight | 10.6 × 22.0 × 15.2 in (W × D × H), 97 lb. |
| Station charging temperature | 32°F to 104°F (0°C to 40°C). |
| Station warranty | 5 years under Anker’s published terms. |
| Specification | Details |
|---|---|
| Included panels | 2 × RICH SOLAR MEGA 250 PRO ONYX, model RS-M250PB, rigid black frame. |
| Rated power | 250W each, 500W total under standard test conditions (STC). |
| Operating point at STC | 36.9V and 6.78A per panel. The two-panel series string is 73.8V and 6.78A. |
| Open-circuit voltage and short-circuit current at STC | 44.7V and 7.24A per panel. The two-panel series string is 89.4V and 7.24A. |
| Panel construction | Black anodized aluminum frame, 128 N-type TOPCon cells and 3.2 mm anti-reflective tempered glass. IP68-rated junction box. |
| Panel size and weight | 60.6 × 29.9 × 1.2 in, 26.9 lb per panel. |
| Panel electrical details | 21.4% module efficiency, −0.28%/°C Voc temperature coefficient and factory solar leads about 47.2 in long. |
| Solar wiring included | Anker factory High-PV solar adapter and one RICH SOLAR RS-50102 50-ft 10 AWG extension set, red and black. |
| Panel warranty | 25-year limited power output and 10-year limited workmanship warranties. RICH SOLAR terms apply. |
Frequently asked questions
Will two 250W ONYX panels charge the S5000?
Yes. Two panels in series have a rated operating point of 73.8V at 6.78A and an open-circuit voltage of 89.4V at standard test conditions. This fits the S5000 High-PV input’s published 16–165V DC range and 17A limit. Verify cold-weather voltage and connector compatibility for your installation.
Why does this kit include one 50-foot cable set?
The two panels form one series string feeding the High-PV input. The red and black leads run together and give you about 50 feet between the panel string and the station adapter.
How much battery energy can I replace in a day?
If the array averages 375W for four hours, it produces about 1.5kWh before cable and conversion losses. Use measured loads and local solar conditions to estimate how much energy you can replace. Shade on either panel can reduce output from the series string.
Can I run a refrigerator, power tools or a 240V pump?
The S5000 supports compatible 120V and 120/240V loads. Compare running and startup watts with the station and outlet ratings. A qualified electrician should verify the pump and install compatible transfer equipment for hardwired loads.
Does the kit include roof or ground mounts?
The panels have pre-drilled mounting holes. Site-specific racking, fasteners and installation are sold separately.
Can I add more solar or battery capacity later?
The second solar input remains available for a separately sized array, and the S5000 supports optional BP5000 batteries. The four-panel ONYX kit uses a separate 500W pair on each input. Confirm the input limits before adding panels.
Manufacturer images may show optional accessories. Browse the Anker SOLIX S5000 collection or see the four-panel ONYX 1,000W kit for more rated solar capacity.
| Shipping | This item ships to |
![]() |
Fast Shipping in the USA. Items ship the same or next day We process orders 7 days a week to ensure the fastest shipping possible. All generators are shipped as fast as possible out of several US locations to ensure the fastest delivery. |
|
![]() |
We Put Our Customers First We have done the research for you to find the best manufacturers with the best warranties. Every unit on our site is covered by a high quality manufacturers warranty. |
|
![]() |
We offer the absolute lowest price we can offer |
|
![]() |
We insist that you love our service. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. |
|
![]() |
Ordering from AllProGenerators.com is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. |
Description
Get started with a 500W rigid solar array and the Anker SOLIX S5000 for a cabin, garage or home backup setup. This AllProGenerators bundle pairs the 5,024Wh station with two black RICH SOLAR MEGA 250 PRO ONYX 250W panels. The pair connects to the S5000’s high-voltage solar input, and the free 50-foot red-and-black extension set lets you place the panels in open sun while keeping the station in a dry, ventilated location.
What comes with the 500W kit
- One Anker SOLIX S5000 with its standard factory accessories, including the High-PV solar adapter.
- Two RICH SOLAR MEGA 250 PRO ONYX 250W black rigid solar panels (RS-M250PB).
- One free RICH SOLAR 50-ft 10 AWG solar extension set (RS-50102) with one red lead and one black lead.

Best use cases
- Cabins and weekend properties. Put the rigid pair on a sunny rack and use the station for a compact refrigerator, lights and chargers. Start with the energy you use over a full day when estimating how much the array will replace.
- Garage and workshop power. Keep the station near a workbench and put the panels where buildings and trees will cast less shade. The station can run compatible tools and task lighting. Start motor-driven tools one at a time to manage surge demand.
- Outage essentials. Plug in a refrigerator, internet equipment and lighting as needed. Daytime solar can restore part of the energy those loads use. A qualified electrician should install compatible transfer equipment for hardwired circuits.
- A starter array with room to grow. Both included panels use High-PV, leaving Low-PV available for a separately sized array. Optional Anker BP5000 batteries can increase storage later.
How the two panels connect to the S5000
The two ONYX panels form one series string feeding the High-PV input through the factory Anker solar adapter. In series, the panel voltages add and the current stays the same. The pair is rated at 73.8V operating voltage and 89.4V open-circuit voltage under standard test conditions. The 50-foot red and black leads run together between the array and the adapter.
Use the High-PV port for this series pair. The S5000 Low-PV input is limited to 60V, below the pair’s open-circuit voltage. Have a qualified installer confirm cold-corrected voltage, polarity, connector compatibility, racking and any site-required electrical protection before connecting the array.

Full specifications
| Specification | Details |
|---|---|
| Model | Anker SOLIX S5000, AS5101A1 |
| Battery | 5,024Wh LiFePO₄. Supports up to five optional Anker SOLIX BP5000 batteries, for about 30kWh total. |
| AC output | 4,500W continuous, 8,000W brief peak. 120V and 120/240V split-phase. |
| AC receptacles | 120V NEMA 5-20R and TT-30R, plus 120/240V L14-30R. Individual outlet limits apply. |
| High-PV solar input | 16–165V DC, 17A max, up to 2,000W with a compatible array. This bundle uses this input. |
| Low-PV solar input | 11–60V DC, 17A max, up to 1,000W with a compatible array. |
| AC charging | Anker lists up to 1,800W input at 120V or 4,500W at 240V with compatible charging equipment and supply. |
| USB charging | USB-A up to 12W and USB-C up to 100W on the highest-power port. |
| Backup switchover | 10 ms or less under Anker’s specified conditions. |
| Station size and weight | 10.6 × 22.0 × 15.2 in (W × D × H), 97 lb. |
| Station charging temperature | 32°F to 104°F (0°C to 40°C). |
| Station warranty | 5 years under Anker’s published terms. |
| Specification | Details |
|---|---|
| Included panels | 2 × RICH SOLAR MEGA 250 PRO ONYX, model RS-M250PB, rigid black frame. |
| Rated power | 250W each, 500W total under standard test conditions (STC). |
| Operating point at STC | 36.9V and 6.78A per panel. The two-panel series string is 73.8V and 6.78A. |
| Open-circuit voltage and short-circuit current at STC | 44.7V and 7.24A per panel. The two-panel series string is 89.4V and 7.24A. |
| Panel construction | Black anodized aluminum frame, 128 N-type TOPCon cells and 3.2 mm anti-reflective tempered glass. IP68-rated junction box. |
| Panel size and weight | 60.6 × 29.9 × 1.2 in, 26.9 lb per panel. |
| Panel electrical details | 21.4% module efficiency, −0.28%/°C Voc temperature coefficient and factory solar leads about 47.2 in long. |
| Solar wiring included | Anker factory High-PV solar adapter and one RICH SOLAR RS-50102 50-ft 10 AWG extension set, red and black. |
| Panel warranty | 25-year limited power output and 10-year limited workmanship warranties. RICH SOLAR terms apply. |
Frequently asked questions
Will two 250W ONYX panels charge the S5000?
Yes. Two panels in series have a rated operating point of 73.8V at 6.78A and an open-circuit voltage of 89.4V at standard test conditions. This fits the S5000 High-PV input’s published 16–165V DC range and 17A limit. Verify cold-weather voltage and connector compatibility for your installation.
Why does this kit include one 50-foot cable set?
The two panels form one series string feeding the High-PV input. The red and black leads run together and give you about 50 feet between the panel string and the station adapter.
How much battery energy can I replace in a day?
If the array averages 375W for four hours, it produces about 1.5kWh before cable and conversion losses. Use measured loads and local solar conditions to estimate how much energy you can replace. Shade on either panel can reduce output from the series string.
Can I run a refrigerator, power tools or a 240V pump?
The S5000 supports compatible 120V and 120/240V loads. Compare running and startup watts with the station and outlet ratings. A qualified electrician should verify the pump and install compatible transfer equipment for hardwired loads.
Does the kit include roof or ground mounts?
The panels have pre-drilled mounting holes. Site-specific racking, fasteners and installation are sold separately.
Can I add more solar or battery capacity later?
The second solar input remains available for a separately sized array, and the S5000 supports optional BP5000 batteries. The four-panel ONYX kit uses a separate 500W pair on each input. Confirm the input limits before adding panels.
Manufacturer images may show optional accessories. Browse the Anker SOLIX S5000 collection or see the four-panel ONYX 1,000W kit for more rated solar capacity.
Shipping
| Shipping | This item ships to |
Delivery
![]() |
Fast Shipping in the USA. Items ship the same or next day We process orders 7 days a week to ensure the fastest shipping possible. All generators are shipped as fast as possible out of several US locations to ensure the fastest delivery. |
|
Why Buy From Us
![]() |
We Put Our Customers First We have done the research for you to find the best manufacturers with the best warranties. Every unit on our site is covered by a high quality manufacturers warranty. |
|
![]() |
We offer the absolute lowest price we can offer |
|
![]() |
We insist that you love our service. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. |
|
![]() |
Ordering from AllProGenerators.com is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. |
Review
Wildcat 10kW Renegade 3ph Tier 4F Diesel Generator
Choose Voltage and Enclosure or No Enclosure (Skid Mount)
PAGURO 4000W Marine Diesel Generator
options/Select one of the following pre-wired AC options:
Off Grid Wired Controller Pure Sine Wave Inverter Power 6000W Solar Inverter 12V/48V/96V/110V DC to AC 120V/230V/240V Converter
Ships From/Input Voltage/Output Voltage, Socket Type




