EcoFlow TITAN 5000 Plus + Two Renogy 400W Portable Solar Suitcases

EcoFlow TITAN 5000 Plus with 800W Portable Solar

This premium portable-solar package combines the EcoFlow TITAN 5000 Plus, two Renogy 400W Lightweight Portable Solar Suitcases and a FREE 50-foot red/black 10 AWG solar extension cable pair. It is built for customers who want the strongest TITAN model, serious whole-home output and a solar array that can be moved, aimed and stored without a permanent rooftop installation.

The TITAN 5000 Plus provides 5,017.6Wh of LFP storage, 7,200W of continuous 120V/240V output and up to 10,000W when solar and AC power are combined under EcoFlow’s published operating conditions. Its dual MPPT inputs accept up to 8,000W total solar. This bundle starts with a practical 800W portable array and can grow later.

What Comes in This Bundle

• 1 × EcoFlow TITAN 5000 Plus portable power station
• 2 × Renogy 400W Lightweight Portable Solar Suitcases, 800W total
• FREE 50-foot red/black 10 AWG solar extension cable pair
• 1 × EcoFlow Solar-to-HP500 charging cable
• 1 × EcoFlow AC charging cable (C20)
• 1 × Quick-start guide
• Free U.S. shipping and USA-based support from AllProGenerators

Correct Series Voltage for the TITAN 5000 Plus

Each Renogy panel operates at 40V and 10A. Wired in series, the pair produces approximately 80V operating voltage, 94.4V open-circuit voltage and 10A operating current. That configuration fits comfortably within either TITAN 5000 Plus MPPT input’s 40–450V, 16A and 4,000W limit.

The series connection is important. Parallel wiring would raise operating current to approximately 20A and exceed the 16A port rating. Follow EcoFlow and Renogy’s current connection instructions and confirm polarity before plugging the array into the TITAN.

A High-Output System with Solar You Can Move

The Plus can accept a very large fixed array, but plenty of customers are not ready for roof-mounted solar. These Renogy suitcases give you a useful 800W starting point that can be set up in the yard, moved away from shade and folded for storage. Each panel weighs 30.2 pounds and includes integrated kickstands, an ETFE surface, fiberglass reinforcement and protected corners.

Best Use Cases

• High-output whole-home emergency backup
• Starting and running compatible central air-conditioning systems
• Refrigeration, pumps, lighting, communications and medical equipment
• Hurricane preparation and longer power outages
• Time-of-use energy management with Smart Home Panel 10
• Off-grid homes, workshops, farms and remote property
• Customers who plan to expand from 5kWh to as much as 30kWh
• Portable solar today with room for a much larger array later

EcoFlow TITAN 5000 Plus Specifications

Renogy 800W Portable Array Specifications

Frequently Asked Questions

Why does this bundle use two 400W panels?

One Renogy panel operates at the TITAN Plus minimum input voltage. Two panels in series raise operating voltage to approximately 80V, providing a better margin for changing sunlight, heat and the included extension cable.

Can both panels connect to one MPPT input?

Yes, when the matching panels are wired in series. The finished string is approximately 80V, 10A and 800W at STC, well inside one port’s published limits.

Should I use the two MPPT inputs separately?

For this two-panel bundle, the recommended configuration is a series string into one input. That leaves the second MPPT available for a future compatible array.

Can the TITAN 5000 Plus run central air?

EcoFlow states that TITAN Plus can directly start and run a compatible 3-ton central air conditioner when the system’s startup demand remains within its capabilities. Confirm the actual HVAC requirements before purchase.

What does “up to 10,000W” mean?

The unit’s rated continuous AC output is 7,200W. EcoFlow specifies up to 10,000W when solar and AC power are combined under supported conditions. It is not a general 10,000W battery-only rating.

Will 800W of solar fully recharge 5kWh in one day?

That depends on location, season, weather, panel angle, active loads and system losses. The array provides useful daytime recovery, but a guaranteed full recharge should not be assumed.

Can I add batteries and solar later?

Yes. Battery capacity can expand to 30kWh. The Plus accepts up to 8,000W of solar across two MPPT inputs, provided every string stays within its port’s voltage, current and wattage limits.

Do I need professional installation?

The built-in outlets can be used directly. Home-panel integration must follow applicable electrical codes and should be completed by a qualified installer.

Compare the Components

• EcoFlow TITAN 5000 Plus details
• Renogy 400W portable solar suitcase
• Rich Solar 50-foot extension cable

Specifications were checked against EcoFlow and Renogy’s current U.S. product information. Always follow the manuals supplied with the equipment.