PECRON E3800LFP Solar Generator with Two 300W Panels

PECRON E3800LFP Solar Generator with Two 300W Panels

Two PV300 folding panels give this E3800LFP package 600W of rated solar collection while keeping the array portable. It is a practical middle ground for RV owners and homeowners who want more daily recovery than a single-panel kit without committing to a large fixed installation.

This version is designed around a balanced 600W portable solar package. The station has a 3,840Wh LiFePO4 battery, a 4,200W pure sine wave inverter and room to grow with compatible EP3800-48V batteries. The included PV300 panels use universal MC4 connectors and fold down for storage.

Why This 600W Solar Bundle Makes Sense

• 600W of included portable solar: 2 folding 300W PV300 panels for renewable daytime charging.
• 4,200W AC output: Handles many demanding 120V appliances, tools and electronics.
• 3,840Wh LiFePO4 storage: Rated for more than 3,500 cycles to at least 80% capacity.
• Fast charging flexibility: Use solar, a standard 15A outlet or the included 30A AC cable.
• Expandable battery system: Add as many as six EP3800-48V batteries for up to 26,880Wh.
• Portable design: Folding panels and the included cart make deployment and storage easier.
• App and UPS functions: Monitor operation through the PECRON app and support essential electronics during outages.

Best Uses

Multi-day outages

A 600W portable array can replace more daytime energy for refrigerators, communications and selected household loads.

Boondocking and RV travel

Deploy both panels at camp, then fold them for transport when it is time to move.

Mobile work and events

Run tools, electronics or event equipment from the 4,200W inverter while using available sunlight to extend operating time.

Solar Array Planning

The included array provides 600W of combined nameplate output. Solar production is never fixed: cloud cover, shade, panel angle, heat and wiring losses all affect charging. For safe operation, keep each solar input within PECRON’s published voltage, current and wattage limits. Open-circuit voltage must remain below the maximum even on cold mornings.

E3800LFP Specifications

PV300 Solar Panel Specifications

What Is Included?

• 1 × PECRON E3800LFP portable power station
• 2 × PECRON PV300 300W portable solar panels
• 1 × Free rolling cart
• 1 × Free 30A AC charging cable
• Manufacturer-supplied cables, accessories and documentation

Frequently Asked Questions

What is the rated solar output of this bundle?

The two included PV300 panels provide 600W of combined nameplate power. Real output varies with sun angle, shading, temperature and weather.

Can the two panels fully recharge the battery in one day?

Under a simple ideal calculation, 3,840Wh divided by 600W is about 6.4 peak-sun hours. Allow additional time for normal system losses and changing conditions.

Does this package provide 240V power?

No. One E3800LFP provides 120V output. A PECRON 240V setup requires two E3800LFP units and the compatible 240V Box.

Can the battery capacity be expanded?

Yes. Add up to six compatible EP3800-48V batteries for as much as 26,880Wh of listed total capacity.

Can it run an air conditioner, refrigerator or well pump?

It can operate many 120V appliances within its running and startup limits. Motors and compressors may draw several times their normal wattage at startup, so confirm the equipment nameplate and surge requirement before ordering.

Can the system operate indoors?

The battery station produces no engine exhaust during use. Keep the equipment dry, maintain ventilation around it and follow PECRON’s temperature and placement instructions.

Are solar results guaranteed?

No. Panel output depends on site conditions. The rated wattage is a laboratory nameplate value, and real-world production varies throughout the day.

Specifications and promotional inclusions are based on current manufacturer information and may change. Professional electrical work may be required for integration with household circuits.