PECRON PV100 100W Portable Solar Panel | IP67

The PECRON PV100 is the grab-and-go panel for smaller power stations, camping kits, and emergency charging. It is light enough to keep in the vehicle, folds down to about 18.7 × 16.8 inches, and gives you useful solar charging without taking over the whole campsite.

No complicated setup here. Unfold it, put the complete panel in clean sunlight, connect it to a compatible DC5521 solar input, and adjust the angle as the sun moves. It is a practical size for phones, lights, communications gear, and other essentials when those devices are powered through a compatible portable power station.

PECRON PV100 Highlights

• 100W-class portable panel with 105W +5% listed peak power
• 23.5% cell efficiency
• Compact folding design
• Approx. 7.7 lb with adapter cable
• IP67 dust and water resistance
• DC5521 connector for compatible equipment

Best Uses

• Compact PECRON power stations with compatible input
• Camping, road trips, and tailgating
• Emergency phones, lights, radios, and communications through a power station
• Small RV, van, and vehicle backup kits
• Customers who value low weight and easy storage

Full Specifications

Compatibility note: Before connecting any solar panel, confirm your power station or charge controller accepts the panel's open-circuit voltage, operating voltage, current, wattage, connector, and polarity. Never exceed the receiving device's solar-input limits. Series wiring raises voltage; parallel wiring raises current. Cold weather can also raise panel voltage.

Real-world output: Solar-panel wattage is a laboratory rating. Actual output changes with sun angle, cloud cover, temperature, shading, panel cleanliness, cable length, and the limits of the connected power station.

Frequently Asked Questions

Will the PECRON PV100 work with a non-PECRON power station?

It may, but the plug alone does not prove compatibility. Match the voltage range, maximum open-circuit voltage, current limit, wattage limit, connector, and polarity before connecting it. An adapter may be required.

What connector does it use?

The PECRON PV100 uses a DC5521 connector. Check the input on your power station before ordering an adapter.

Will it always produce its rated wattage?

No portable panel produces its nameplate rating all day. For the strongest output, point the entire panel directly at clear sun, keep every section unshaded, and reposition it as the sun moves.

Can I leave it outside in the rain?

The panel carries an IP67 rating, but portable panels and connectors should not be submerged or left sitting in water. Keep connections dry, close unused ports, and let everything dry before folding and storing.

Can I connect more than one panel?

Only if the final array stays within your power station or charge controller's voltage, current, and wattage limits. If you are not sure, contact us with the exact power-station model before connecting panels in series or parallel.

AllProGenerators Support

The PV100 is simple, but compatibility still matters. Send us the exact power-station model if you want us to double-check voltage and connector requirements before you order.