PECRON PV500 500W Bifacial Portable Solar Panel | IP67

The PECRON PV500 is the big folding panel for customers who want serious solar input without installing permanent roof panels. Open it up, aim it at the sun, and the 500W bifacial design can collect light from the front while also using reflected light on the rear surface. This is a lot of charging power in a portable package, but it still folds into its carry bag when the job is done.

If you are trying to recharge a larger power station during an outage, at an RV site, or off-grid, this is the panel that makes sense. No complicated roof mount is required. The adjustable kickstands help you dial in the angle, and the included MC4 extension and MC4-to-XT60 cables give you a practical starting setup.

Why Choose the PECRON PV500?

• 500W rated output for faster charging of high-capacity power stations
• Bifacial panel design can use reflected sunlight behind the panel
• 25.1% cell efficiency in PECRON's current specification
• IP67 dust and water resistance for outdoor use
• Adjustable kickstands for better sun angle
• Folds to 34.76 × 32.93 × 3.52 inches and weighs about 22.49 lb
• MC4 connectivity for broad solar-system flexibility

Best Uses

• Large PECRON portable power stations
• Home-outage solar recharging
• RV, van, and overland power systems
• Cabins, campsites, remote work, and field equipment
• Customers who want portable solar without permanent installation

What's Included

• PECRON PV500 foldable solar panel
• Carry/storage bag
• 4-meter MC4 extension cable
• 0.6-meter MC4-to-XT60 cable
• User manual

Full Specifications

Compatibility note: Before connecting any solar panel, confirm your power station or charge controller accepts the panel's open-circuit voltage, operating voltage, current, wattage, connector, and polarity. Never exceed the receiving device's solar-input limits. Series wiring raises voltage; parallel wiring raises current. Cold weather can also raise panel voltage.

Real-world output: Solar-panel wattage is a laboratory rating. Actual output changes with sun angle, cloud cover, temperature, shading, panel cleanliness, cable length, and the limits of the connected power station.

Frequently Asked Questions

Will the PECRON PV500 work with a non-PECRON power station?

It may, but the plug alone does not prove compatibility. Match the voltage range, maximum open-circuit voltage, current limit, wattage limit, connector, and polarity before connecting it. An adapter may be required.

What connector does it use?

The PECRON PV500 uses MC4 connectors. Check the input on your power station before ordering an adapter.

Will it always produce its rated wattage?

No portable panel produces its nameplate rating all day. For the strongest output, point the entire panel directly at clear sun, keep every section unshaded, and reposition it as the sun moves.

Can I leave it outside in the rain?

The panel carries an IP67 rating, but portable panels and connectors should not be submerged or left sitting in water. Keep connections dry, close unused ports, and let everything dry before folding and storing.

Can I connect more than one panel?

Only if the final array stays within your power station or charge controller's voltage, current, and wattage limits. If you are not sure, contact us with the exact power-station model before connecting panels in series or parallel.

AllProGenerators Support

Not sure whether the PV500 matches your power station? Send us the exact model number before ordering. We would rather help you verify the input limits now than have you guess at the connection later.